Cool steel grey
Siding & Exterior tools and references.
Exterior planning cards for siding, wrap, soffit, fascia, trim, and waste-factor estimates.
Hub Structure
Calculators
Working calculators for quick planning.
Enter the measurements you have, keep units consistent, and use the formula notes to understand how each result is estimated.
Siding & Exterior
Siding Square Footage Calculator
Estimate net siding wall area after opening deductions and waste.
Results
Enter the required measurements to calculate results.
Net siding area = gross wall area - openings. Buy area = net area x (1 + waste).
Help
- Measure gables and wall faces separately for better accuracy.
Siding & Exterior
House Wrap Estimate
Estimate house wrap rolls from wall area, openings, waste, and roll coverage.
Results
Enter the required measurements to calculate results.
Rolls = (gross wall area - openings) x (1 + waste) / roll coverage.
Help
- Overlap, seams, and product width affect real coverage.
Siding & Exterior
Soffit & Fascia Calculator
Estimate soffit area and fascia length from eave length and overhang.
Results
Enter the required measurements to calculate results.
Soffit area = eave length x soffit depth. Fascia length = eave length. Waste applies to both.
Help
- Measure different overhang depths separately for better accuracy.
Siding & Exterior
Exterior Trim Length
Estimate exterior trim length with waste allowance.
Results
Enter the required measurements to calculate results.
Total trim = corner trim + window/door trim + band/frieze trim. Buy length = total x (1 + waste).
Help
- Does not produce a cut list; profile changes should be calculated separately.
Siding & Exterior
Waste Factor Calculator
Apply a waste percentage to a measured quantity.
Results
Enter the required measurements to calculate results.
Order quantity = measured quantity x (1 + waste percentage). Waste quantity = order quantity - measured quantity.
Help
- Use units consistently, such as sq ft, linear ft, pieces, or cubic yards.
Quick References
Practical reference slots.
This area is ready for formulas, terminology, measurement notes, unit conversions, and checklists as each tool is verified.
Before You Calculate
Start with clear measurements.
Measure each wall face and major opening separately.
Record soffit, fascia, corner, and trim runs.
Note material profile and exposure assumptions for later calculator passes.